Center Enamel Delivers Four High-Capacity Glass-Fused-to-Steel Potable Water Storage Tanks for Malaysia Potable Water Storage Tank Project
Created on 10.15
Center Enamel Delivers Four High-Capacity Glass-Fused-to-Steel Potable Water Storage Tanks for Malaysia Potable Water Storage Tank Project
Water is the foundation of life, economic growth, and social well-being. In Malaysia, a rapidly developing nation with growing urban populations and demanding industrial sectors, ensuring a clean and secure potable water supply is a top infrastructure priority. To meet this need, Shijiazhuang Zhengzhong Technology Co., Ltd (Center Enamel)—Asia’s largest and most experienced manufacturer of Glass-Fused-to-Steel (GFS) tanks—completed the Malaysia Potable Water Storage Tank Project in October 2025, marking another milestone in sustainable water infrastructure development.
The Malaysia Potable Water Storage Tank Project was developed to enhance regional potable water infrastructure by delivering safe, long-term, and large-volume water storage capabilities. The project scope included the engineering, supply, and installation of four Glass-Fused-to-Steel potable water tanks, specifically designed to meet Malaysia’s stringent health and environmental standards.
Key Project Information:
· Application: Potable Water Storage Tank
· Project Location: Malaysia
· Tank Size: φ17.58 meters × 21 meters (height) – 4 sets
· Completion: October 2025 – construction completed and fully operational
Each tank provides a significant storage volume, supporting both municipal and industrial water supply demands while ensuring continual access to safe drinking water for thousands of residents.
Center Enamel’s Glass-Fused-to-Steel technology is recognized globally for its combination of strength, durability, and hygienic performance. This advanced material is produced by fusing a layer of specially formulated glass to high-strength steel plates at over 800°C. The resulting composite retains the strength and flexibility of steel with the remarkable corrosion resistance and inertness of glass.
The glass layer provides a protective barrier, making the steel core completely resistant to water and chemical corrosion. Even in Malaysia’s humid, tropical climate, GFS tanks maintain structural integrity for decades. The panels resist pH levels ranging from 1 to 14, ensuring compatibility with varying water treatment conditions.
Center Enamel’s tanks are certified to NSF/ANSI 61, ISO 28765, WRAS, and EN1090 standards. The ultra-smooth, non-porous enamel surface prevents bacterial growth, sediment accumulation, or any risk of chemical leaching. These features guarantee clean, safe, and uncontaminated water storage in full compliance with international potable water safety standards.
The GFS panels are designed for exceptional tensile and compressive strength. The tank’s height—21 meters—demands superior engineering precision to withstand hydrostatic pressure. Each tank is equipped with durable structural accessories such as roof supports, nozzles, ladders, and handrails, all complying with OSHA and Eurocode safety guidelines.
Unlike welded or concrete tanks, GFS tanks are bolted systems constructed from modular prefabricated panels. These panels are shipped in compact cargo, assembled on-site, and sealed using proprietary gaskets for total leak-proof performance. Should future demand rise, capacity expansion can be achieved swiftly by integrating additional rings, minimizing downtime and cost.
With a lifespan exceeding 30 years, GFS tanks demand minimal maintenance. The inert glass layer never requires repainting or recoating, drastically reducing long-term operating costs and eliminating environmental hazards associated with paint and solvents.
Each of the four potable water tanks was engineered with precision to handle high head pressure and optimized flow management for water treatment operations. Attention to detail extended from material selection to foundation design, installation safety, and system integration.
Key Engineering Features:
· Roof System: Designed for complete water isolation with internal tie rods for strength and external handrails for safety compliance.
· Seismic and Wind Load Calculations: Structural stability designed according to Eurocode and AWWA D103-09 requirements, ensuring resilience in Malaysia’s tropical weather and potential seismic conditions.
· Enhanced Gaskets: Specialized EPDM gaskets ensure longevity and prevent leakage, even under pressure or thermal expansion.
· Foundation Integration: Tanks are installed on reinforced concrete bases designed to distribute load evenly and prevent localized settlement.
This combination of engineering rigor and local adaptation guarantees durability, hygiene, and operability under Malaysia’s geographic and climate conditions.
The Malaysia Potable Water Storage Tank Project underscores Center Enamel’s commitment to sustainability and environmental responsibility.
· Sustainable Materials: GFS tanks use fully recyclable steel and require minimal raw materials compared with traditional reinforced concrete tanks.
· Reduced Operational Carbon Footprint: The low-maintenance design eliminates periodic repainting, reducing resource consumption and energy use.
· Water Conservation Benefits: Leak-free performance ensures that every drop of potable water reaches consumers without loss, waste, or contamination.
The completed project contributes directly to Malaysia’s National Water Services Industry Framework, which seeks sustainable utilities that balance growth with ecological preservation.
The GFS modular kits were fabricated, quality-tested, and shipped from Center Enamel’s production facility in China to Malaysia. Upon arrival, a dedicated installation team executed the assembly on pre-prepared foundations. Advanced mechanical lifts and precision alignment tools ensured safe, efficient construction despite the tanks’ considerable size and height.
After assembly, each tank underwent rigorous:
· Leak tests (hydrostatic and pneumatic) to verify sealing integrity;
· Coating inspection to confirm glass adhesion consistency; and
· Final approval tests coordinated with local authorities to confirm compliance with potable water regulations.
The project was completed on schedule and delivered to the client ready for immediate integration into the region’s water distribution network by October 2025.
This project plays a transformative role in ensuring reliable access to potable water for Malaysian communities. The tanks add significant storage capacity, addressing both current and future population needs while enhancing the resilience of local water supply infrastructure.
Clean, safe, and continuously available water directly improves community health outcomes. GFS tanks ensure water purity throughout storage, eliminating contamination risks from corrosion or biological buildup.
As urban development accelerates, demand for stable water supplies grows. These four tanks strengthen Malaysia’s municipal storage network, enabling efficient water distribution even during maintenance outages or seasonal shortages.
The tanks’ low lifecycle cost, combined with their environmental sustainability, align with Malaysia’s long-term goal of creating high-efficiency, low-impact infrastructure. Municipal utilities benefit from reduced maintenance burdens and operational savings over the system’s full lifespan.
Center Enamel continues to build its reputation as a key technology partner for potable water projects worldwide. With over 30 years of experience and projects delivered in over 100 countries, the company has developed unmatched technical expertise and earned recognition as Asia’s most experienced professional bolted tank manufacturer.[3][2]
Each tank embodies decades of engineering evolution, a deep understanding of materials science, and a steadfast dedication to sustainability. Certified under NSF/ANSI 61, ISO9001, ISO28765, and EN1090, Center Enamel ensures that every tank meets the most demanding performance and safety benchmarks before leaving the factory.
The successful delivery of the Malaysia Potable Water Storage Tank Project aligns with Center Enamel’s mission of enabling global water resilience through innovative tank technology. Beyond potable water storage, the company’s GFS tanks serve essential roles in wastewater management, biogas systems, fire water storage, and agricultural water supply.
By merging technological excellence with eco-conscious design, Center Enamel’s tanks help cities and industries strengthen their infrastructure while minimizing environmental footprints.
The Malaysia Potable Water Storage Tank Project, completed in October 2025, demonstrates the power of innovation, precision engineering, and commitment to sustainability. With four enormous tanks, each measuring 17.58 meters in diameter and 21 meters in height, Center Enamel has delivered one of the most advanced potable water storage systems in the region.
These GFS tanks not only secure Malaysia’s clean water supply but also serve as a model for durable, scalable, and environmentally responsible infrastructure worldwide.
Through this project, Center Enamel reinforces its status as a global leader in safe water storage—blending advanced materials with engineering mastery to help communities thrive and sustain their most essential resource: water.
WhatsApp