logo.png

sales@cectank.com

86-020-34061629

English

Makeup Water Tanks For UK Projects: WRAS Approval And Material Selection

Created on Today

Makeup Water Tanks For UK

Makeup Water Tanks For UK Projects: WRAS Approval And Material Selection

Since Brexit the United Kingdom is a separate regulatory regime from the EU for water fittings, and that changes how a makeup water storage tank is specified for a UK project. WRAS approval under the Water Supply (Water Fittings) Regulations 1999 is the market gate for anything contacting the public water supply, and material testing to BS 6920 is the accepted route. This article focuses on those UK-specific rules and the material choices that suit British maritime and temperate conditions, rather than repeating EU-wide advice.
The route below: WRAS and the Fittings Regulations, material choices for UK duty, backflow protection, climate notes, CE's references for UK buyers, and a sourcing checklist.

WRAS And The Water Fittings Regulations 1999

WRAS approval confirms that a product or material is acceptable under the UK Water Supply (Water Fittings) Regulations 1999. For wetted materials, testing to BS 6920 (taste, odor, growth, metals, toxicity) is the standard evidence. Post-Brexit, UKCA marking has partly replaced CE for certain product categories, so the buyer should confirm which marking route the specific component follows and not assume EU CE alone suffices in Great Britain.

Material Choices For UK Makeup Water

For general industrial makeup, GFS with a holiday-tested enamel lining and a WRAS-acceptable formulation is a common low-life-cycle-cost choice; FBE serves more aggressive exposures; stainless 316L is reserved for high-purity or hygienic duty. The deciding factor is the water chemistry and whether the tank contacts the public supply - if it does, the wetted path must carry the BS 6920 / WRAS evidence.
Option
UK duty fit
WRAS note
GFS (enamel)
General industrial atmospheric
WRAS-acceptable formulation required if potable-adjacent
FBE
Aggressive chemical exposure
Material must pass BS 6920 if wetted
Stainless 316L
High-purity, hygienic
Inert; still confirm wetted compliance
Galvanized
Non-potable backup
Not for potable contact

Backflow Protection Under EN 1717 (UK-Adopted)

Where potable and non-potable streams mix, backflow protection following EN 1717 principles (adopted in UK practice) is required. For a makeup tank this typically means air-gap or approved device separation between the treated-water buffer and any non-potable source, specified explicitly rather than left implicit.

Maritime And Temperate Climate Notes

The UK's maritime climate brings high humidity and coastal salinity that accelerate external corrosion, plus interior condensation on cold surfaces. Specify external coating suited to C4-C5 corrosivity near coasts, adequate ventilation to limit condensation, and anchoring for the UK wind load case. These are practical UK conditions that a generic guide omits.

CE References For UK Buyers

Center Enamel has no project reference inside the United Kingdom, stated honestly. Capability for UK buyers is demonstrated by verified European deliveries sharing the same EN 1090-aware, coated-tank and stainless technology - Czech Republic stainless (647 m3, 2026-01), Cyprus GFS (5,557 m3, 2025-11), and Panama potable GFS (4,956 m3, 2025-04). These are analogous execution proof, not UK contracts, and a UK buyer should request the WRAS/British-standard alignment separately.

UK Sourcing Checklist

Check
Why
How
WRAS / BS 6920
Potable contact legality
Material test report
UKCA vs CE route
Correct marking
Confirm per component
Backflow device
EN 1717 compliance
Specify air-gap / device
Coastal corrosion class
External life
C4-C5 external coating
Coating test evidence
Lining soundness
1,500 V holiday test

Company Expertise

Center Enamel (founded 2008, Shijiazhuang) manufactures GFS, FBE, stainless, galvanized, and welded tanks plus aluminum geodesic dome roofs, certified to ISO 9001, ISO 45001, NSF/ANSI 61, EN 1090/CE, WRAS, and FM, with documented European deliveries across GFS, stainless, and pressure-vessel products.

Frequently Asked Questions

Is WRAS approval mandatory for a UK makeup tank?
Where the tank contacts the public water supply, WRAS approval under the Water Fittings Regulations 1999 is effectively the market gate; material testing to BS 6920 is the usual evidence.
Does Brexit change CE marking for tanks in the UK?
Partly. UKCA has replaced CE for some product categories in Great Britain; confirm which marking route each component follows rather than assuming EU CE alone suffices.
What material is best for UK industrial makeup water?
GFS is the common low-life-cycle-cost choice for general duty with a WRAS-acceptable formulation; FBE for harsher exposures; 316L for high-purity. Follow water chemistry and potable contact.
Is backflow protection needed?
Yes where potable and non-potable streams mix, per EN 1717 (UK-adopted) - specify an air-gap or approved device.
How does UK climate affect tank specification?
Maritime humidity and coastal salinity demand C4-C5 external coating and condensation control; anchors must suit the UK wind case.
Does Center Enamel have a UK project reference?
No UK case is on record; UK buyers are shown analogous European deliveries (Czech Republic, Cyprus, Panama) as execution proof, with WRAS/British-standard alignment requested separately.
What coating proof should I request?
A 1,500 V holiday test on every GFS plate and a thickness log; for potable contact, the BS 6920 / WRAS material report.

Conclusion

For UK projects, WRAS approval and BS 6920 material evidence are the gate for any potable-adjacent makeup tank, and the post-Brexit UKCA versus CE route must be confirmed per component. Match the material to the water chemistry, add EN 1717 backflow protection and a coastal-corrosion external coating, and verify any claimed UK reference.

Work With Center Enamel

Share your UK site, water grade, and whether the tank contacts the public supply, and we will return a WRAS-aligned makeup tank specification and UK sourcing checklist.
Center Enamel (Shijiazhuang Zhengzhong Technology Co., Ltd., est. 2008) manufactures GFS, FBE, stainless, galvanized, and welded tanks plus aluminum geodesic dome roofs, certified to ISO 9001, ISO 45001, NSF/ANSI 61, EN 1090/CE, WRAS, and FM, with exports to 100+ countries.
WhatsApp