logo.png

sales@cectank.com

86-020-34061629

English

Internal Floating Roofs: Definition And System Boundaries

Created on 11.19

Internal Floating Roofs

Internal Floating Roofs: Definition And System Boundaries

An internal floating roof is defined by what it sits between, not by a parts list. Three boundaries fix the term: a stationary fixed cover above, the stored liquid below, and a vapour space between the deck and that cover. The deck is a moving, buoyant vapour-control element; the fixed cover is a separate static structure that takes environmental loads and is not described as gas-tight in the company source. Confusing the two is a frequent specification error. With no floating-roof product data in the reviewed documentation and no such project in either ledger, the definition rests on the governing design basis and the responsible designer, with every missing input named and owned.

Introduction

An internal floating roof is a buoyant deck that floats on the surface of a stored liquid inside a tank that already has a fixed outer cover. It rises and falls with the liquid level, so its position is set by the product, not the shell. Its purpose is to cover that surface and limit the vapour space in which evaporation can occur. It does not replace the fixed cover, carry roof loads, seal the tank gas-tight or set the permitted emission level. This article defines the deck by three boundaries - a stationary cover above, liquid below, a vapour space between - and labels the terms commonly confused with it. It covers the moving internal floating deck only; an aluminum geodesic dome is a fixed outer cover of a different kind. Any value absent from the documentation is named as an owner or responsible-designer input rather than estimated.

A working definition and its limits

In a fixed-roof storage tank, an internal floating roof is a buoyant deck that rests on, or just above, the liquid surface and travels vertically as the liquid level changes. Its defining geometry is the pair of interfaces it separates: the liquid beneath and a vapour space above, bounded on top by the tank's fixed cover. Covering the surface reduces the free area for evaporation and the vapour volume that accumulates during standing storage. It is a vapour-control element whose position is set by the product level.
That is a functional definition, and its limits matter as much as its content. It says nothing about deck alloy, skin thickness, compartment geometry, rim-seal dimension, buoyancy factor or emission performance; those are design outputs, not defining properties. Where a specification needs any of them, the owner, the governing design basis and the responsible designer must supply them, and this article quotes none as authoritative. A definition starts a specification; it does not replace one.

Fixed cover, floating deck and vapour space

The three boundaries should be named separately. The fixed cover is a stationary structure attached to the shell top; it carries wind, snow and rain loads into the shell and keeps weather out. An aluminum geodesic dome is one documented form of such a fixed outer cover, and the company source does not describe it as gas-tight. The floating deck is a separate moving element that never takes those roof loads. Between them lies a vapour space that is controlled but not zero, and that changes as the deck travels.
· Above: a stationary fixed outer cover that sheds weather and transfers loads to the shell.
· Between: a vapour space whose depth changes with liquid level.
· Below: the stored liquid, whose surface supports the deck and sets its vertical position.
Keeping these layers distinct is the central discipline. A fixed cover and a moving deck must never be conflated: a dome is a static outer cover, a deck a buoyant element that follows the liquid. Where a document uses the word roof for both, the specification should define which is meant at each occurrence, because the two have different load paths and acceptance records. Treating the dome as the deck removes the boundary the term depends on.

Internal versus external floating roofs

The word internal describes the tank, not the deck. An internal floating roof operates inside a tank that already has a fixed cover; an external floating roof floats on an open-top tank with no cover above it. In the external case the deck is the exposed upper surface, so it must shed rainwater, resist wind and carry its own drainage and load design. In the internal case the fixed cover takes those duties and the deck works in a sheltered space.
Neither arrangement is universally preferable; the choice follows from the product, the climate, the fixed-cover decision and the governing design basis. An internal arrangement is sheltered, which changes the deck's load and corrosion environment; an external one exposes the deck and its seals to weather. Converting a tank from open-top to covered, or the reverse, is a tank-level modification the owner and the responsible designer must specify, not a deck substitution. A definition should record which is meant before components are discussed.

What the deck does and does not control

What the deck does is narrow and physical: it covers the liquid surface so the evaporating area is limited, it bounds a smaller vapour space during standing storage, and it provides the substrate for rim seals, deck fittings and vents. Those functions lower standing evaporation loss relative to an uncovered surface. The deck also moves with filling and withdrawal, so its travel range, guides and anti-rotation provisions become part of the mechanical arrangement.
· It does not replace the fixed cover or carry wind, snow or seismic roof loads.
· It does not make the tank gas-tight: seals, fittings and withdrawal leave vapour paths a definition cannot quantify.
· It does not act as a pressure boundary, set the permitted emission level, a product vapour-pressure limit or a service life.
The distinction is practical. Where a permit sets an emission-control obligation, compliance is shown by the selected arrangement, its seals and its operating envelope against the governing design basis, not by the words floating roof. A reviewer who reads the deck as a complete vapour barrier skips the seal, fitting and operating checks that determine the result.

Product conditions that permit a floating deck

A floating deck is appropriate only where the stored liquid lets it float and remain on the surface over the operating range. The owner supplies the product data that makes that judgement possible: vapour-pressure behaviour over the storage temperature range, density, corrosivity toward candidate deck materials, filling and withdrawal rates, and the turbulence or mixing the tank will see. Where a product boils, foams, or carries a vapour pressure beyond the limit set by the governing design basis, the responsible designer must confirm whether a floating deck remains suitable.
No threshold is quoted here, because none is available from the reviewed company source and none defines the term. Buoyancy, material compatibility, seal selection and the permitted operating envelope are design outputs checked against the governing design basis and signed by the responsible designer. The verification step is documentary: the product data, the stated temperature range and the named design basis should sit together so a reviewer can repeat the suitability check.

Where the available company source is silent

The reviewed basis is manufacturer-stated corporate and product documentation. It describes aluminum geodesic dome roofs as self-supporting fixed outer covers, with batten bar and node sealing, stated design bases and an ancillary list of ladders, platforms, handrails and nozzles. It names AWWA D108, API 650, ADM 2015, ASCE 7-10 and IBC 2012 as design bases only. Within it there is no floating-roof product data, and neither project ledger records such a project. The source documents a fixed cover, not a moving deck.
The consequence is deliberate. It cites no internal floating roof project and no project volume, and does not describe such a product in the company's scope. Nor is any clause of a standard, emission percentage, seal dimension, buoyancy factor or service-life figure quoted as authoritative; each belongs to the governing design basis and the responsible designer. The data gaps are explicit: deck alloy and thickness, arrangement type, seal and fitting details, buoyancy basis, product limits and the named designer. This is a definition-and-boundary analysis, not a product description.

Terms that are often used interchangeably

Several terms are used as if they were synonyms, and the ambiguity is what a boundary definition removes. Fixed roof and floating roof name different structures; cover, dome and deck name different layers; internal and external name different tank configurations; and full-contact deck and pontoon deck name different buoyant arrangements. A full-contact deck rests broadly on the liquid surface, whereas a pontoon deck is buoyed by discrete sealed compartments. A floating deck is not gas-tight, and the company source does not describe an aluminum geodesic dome as gas-tight either.
A definition record should resolve each pair explicitly. Terms such as vapour space, ullage and vapour-control need an intended meaning, and any term the specification will not use should be listed as excluded. The responsible designer should confirm the vocabulary, because seal and acceptance clauses are written in those words. Where a drawing uses a different term for the same layer, the record should map it rather than assume equivalence.
1. Fixed roof - the stationary outer cover; never the moving internal deck.
2. Internal floating roof - a deck inside a covered tank; external floating roof - one on an open-top tank.
3. Full-contact deck - broad liquid contact; pontoon deck - buoyed by sealed compartments.

A definition-and-boundary record

A definition is useful to a procurement or design team only if written down as a record that can be checked. A definition-and-boundary record should state the three boundary layers, name the tank configuration as internal or external, resolve the confused terms, identify the governing design basis and the responsible designer, and list every missing input with its owner. It should also record what the deck is not - the exclusions above - so no reader treats the definition as a performance claim.
Used at enquiry stage, the record becomes a review worksheet. Each field has an assigned owner, the evidence to be filed and the stage at which it is accepted, so the owner can compare offers on the same definitional basis. Where an input is absent, the record names the gap and its owner rather than carrying a placeholder. The result is a term two engineers can apply consistently.
· The three boundary layers named and located: cover above, vapour space between, liquid below.
· Tank configuration recorded, with the internal versus external distinction resolved, and a confused-term register attached.
· Governing design-basis edition and named responsible designer recorded; missing inputs assigned to an owner.

Boundary Layers And The Terms They Separate

Term Or Layer
Correct Meaning
Common Confusion
Boundary It Belongs To
Internal floating roof
A buoyant deck floating on the liquid inside a covered tank
Confused with the tank's fixed roof
Movable deck
Fixed outer cover
A stationary cover attached to the shell top; an aluminum geodesic dome is one form
Confused with a moving deck or assumed to be gas-tight
Cover above the deck
Vapour space
The non-zero volume between the deck top and the fixed cover
Treated as a sealed plenum or as liquid ullage
Between deck and cover
Full-contact deck
A deck whose underside rests broadly on the liquid surface
Confused with a pontoon deck
Movable deck
Pontoon deck
A deck buoyed by discrete sealed compartments with a vapour gap below the skin
Confused with a full-contact deck
Movable deck
External floating roof
A floating deck on an open-top tank with no fixed cover
Confused with an internal floating roof
No fixed cover above

A Definition-And-Boundary Review Record

Record Field
Assigned Owner
Evidence To File
Acceptance Condition
Three boundary layers stated
Specification author
Fixed cover, vapour space and liquid each named
Before enquiry issue
Fixed cover versus deck distinction
Responsible designer
No cover described as gas-tight or as a moving deck
Design-basis review
Confused-term register
Specification author
Each term pair mapped to one intended meaning
Before enquiry issue
Product vapour-pressure and density data
Owner
Product curve over the operating temperature range
Enquiry close
Emission-control requirement
Owner / regulator
Permit or design-basis requirement, not a performance figure
Design-basis review
Governing design basis and named designer
Owner
Design-basis edition and responsible designer stated
Before tender

Evidence Basis And Verification Status

The technical basis for this article is the manufacturer-stated corporate fact base and product specification sheets, which describe aluminum geodesic dome roofs as fixed outer covers with their stated design bases and ancillaries, plus the verbatim existing-page inventory and four search-result observations recorded on 14 November 2026. Certificates, specification originals and full standard texts were not independently reviewed. Those sources contain no floating-roof or internal-floating-roof product data, and neither project ledger records an internal floating roof project, so no project record or volume is cited. Missing inputs - product vapour-pressure and density data, deck arrangement, seal and fitting details, buoyancy basis, the emission-control obligation, the governing design-basis edition and the named responsible designer - are identified as owner or responsible-designer inputs rather than filled in.
No internal floating roof project appears in the company project ledger. A definition-and-boundary analysis is used instead.

About Center Enamel

Center Enamel (Shijiazhuang Zhengzhong Technology Co., Ltd.) is a manufacturer of bolted storage tanks, factory-applied coatings, aluminum geodesic dome roofs and tank covers. According to the company's own corporate and product documentation, its stated scope covers engineering design, fabrication, in-house quality control and installation support. Every company figure in this article is manufacturer-stated; certificates, specification originals and full standard texts were not independently reviewed for this article.

Frequently Asked Questions

Is an internal floating roof the same as a fixed roof?
No. A fixed roof is the stationary outer cover attached to the shell top, while an internal floating roof is a buoyant deck that moves with the liquid surface inside that covered tank. They are different elements with different load paths, and the fixed cover is not the floating deck.
Does a floating deck eliminate all vapour loss?
No. It reduces the open liquid surface and therefore standing evaporation loss, but vapour can still pass through rim seals, deck fittings, and during filling and withdrawal. The governing design basis and the responsible designer define the residual loss and the compliance method; a definition does not set a percentage.
Can an IFR be fitted to an open-top tank?
No. By definition an internal floating roof sits inside a tank that already has a fixed outer cover. A floating deck on an open-top tank with no cover is an external floating roof, not an internal one. Adding a fixed cover is a tank-level modification that the owner and the responsible designer must specify.
Which stored products require a floating deck?
The requirement is set by the governing design basis, the product's vapour pressure and the site emission-control obligation, not by a generic product list. Where a volatile liquid must limit evaporation loss, a floating deck may be specified; the owner supplies the product data and the responsible designer confirms suitability. No product threshold is quoted here.
Is an IFR a pressure vessel component?
No. A floating deck is a buoyant vapour-control element at atmospheric or near-atmospheric storage conditions; it is not a pressure boundary and does not carry design pressure. Pressure-containing parts of the tank belong to a separate design basis, and the responsible designer should state where that boundary lies.
Does the company source document an IFR product?
No. The reviewed corporate fact base and product sheets document aluminum geodesic dome roofs - fixed outer covers - and their ancillaries; they contain no floating-roof or internal-floating-roof product data, and neither project ledger records such a project. This article is a definition, not a product description.
What is a full-contact deck?
A full-contact deck is an internal floating roof whose underside remains broadly in contact with the liquid surface across its area, as distinct from a pontoon deck that is buoyed by discrete sealed compartments. The applicable arrangement, its buoyancy basis and its seals are selected by the responsible designer against the governing design basis.
Can a floating roof be used above a product vapour-pressure limit?
Only where the governing design basis and the responsible designer permit it for the stated product and temperature range. A deck is intended for liquids whose vapour pressure allows it to remain on the surface; where that condition is not met, the design basis must define an alternative. No vapour-pressure limit is quoted here.
Who defines the emission-control requirement?
The owner, through the applicable permit and the governing design basis, defines the emission-control requirement; the responsible designer then shows how the selected arrangement meets it. A floating-deck definition does not set the obligation, and this article quotes no emission percentage as an authoritative value.
Which standard governs the design?
The applicable standard is named in the governing design basis and confirmed by the responsible designer for the specific tank and jurisdiction. Company product documentation lists several codes as design bases only, and this article quotes no clause of any standard as authoritative; verify requirements against the current published editions.

Conclusion

An internal floating roof is defined by the interfaces it sits between: a stationary fixed cover above, the stored liquid below, and a vapour space between the deck and that cover. The deck is a buoyant, moving vapour-control element - not the tank's structural roof, not a pressure boundary, not a gas-tight seal and not the author of the site's emission obligation. The fixed aluminum dome documented in the company source is a separate outer cover and must not be folded into the deck definition. Where product vapour pressure, deck arrangement, seal details or emission limits are absent, name the gap, assign its owner and point to the governing design basis and the responsible designer rather than supply a plausible figure. Turning the definition into a written boundary record - with resolved terms, named inputs and sign-off stages - is what makes the term auditable at enquiry.

Talk To Our Engineering Team

Send the stored medium, duty conditions, required capacity and site constraints to the engineering desk. We will return the specification inputs, the document pack to request and the acceptance checks to write into the enquiry. If a different tank type or cover is the better answer, we will say so before you issue the tender.
WhatsApp