Ithangi Lensimbi Ehlanganiswe Nengilazi: Ukuhlola Abahlinzeki Nezincazelo
Kwadalwa ngo 09.30
Ithangi Lengilazi Ehlanganiswe Nensimbi: Ukuhlola Abahlinzeki Nezincazelo
Liyini Ithangi Lengilazi Ehlanganiswe Nensimbi?
A glass fused to steel tank combines the structural strength of steel with a vitreous enamel interior fused at 820–930°C, producing an inert, corrosion-resistant composite. For buyers, the key is verifying the supplier's enameling control, standards compliance, and verified project references before purchase.
Kusebenza Kanjani?
Hlola isithando somhlinzeki kanye nenqubo yokufaka i-enamel, ubufakazi bokuhlolwa ngesikhathi samaholide nokunamathela kwephaneli ngayinye, amazinga asebenzayo (ISO 28765, AWWA D103-09, NSF/ANSI 61 wamanzi okuphuza), kanye namaphrojekthi aqediwe afanayo. Amathangi e-GFS aboshiwe abese ethunyelwa ngekhwalithi elawulwa efektri kanye nokwakhiwa okusheshayo.
Izinhlobo Eziyinhloko, Izingxenye, Nezici
Ithangi le-GFS eliboshiwe. Ukwakhiwa okujwayelekile kwamanzi/amanzi angcolile/i-biogas.
I-digester ye-GFS. Ayivumi igesi ukuze isebenze ngaphandle komoya.
Izingxenye eziyinhloko: iphaneli ene-enamel, i-gasket, isibophezelo, uphahla, isisekelo, ama-nozzle.
Izinhlelo Zokusebenza
· - Amanzi okuphuza kanye nokucubungula - Amanzi angcolile kanye ne-leachate - Ukugaya kwe-anaerobic kanye ne-biogas - Izinqolobane zokuvikela umlilo
Ukucatshangelwa Kwezobuchwepheshe
Izinto zokwakha. Insimbi + i-vitreous enamel.
Umthamo. 20–60,000 m³; i-modular.
Ukugqwala. Isivikelo se-enamel engasebenzi.
Izindinganiso. ISO 28765, AWWA D103-09, NSF/ANSI 61.
Ukufakwa / ukunakekelwa. Phatha amaphaneli; ukugcoba okuncane.
Isikhathi sokusebenza. Iminyaka engama-30+ ebhaliwe.
Isifundo Somklamo
Isifundo Somklamo — Malaysia — Amanzi okuphuza (20380m³, 4, kwaqedwa 2025-10)
Isendlalelo Somsebenzi
Uhlobo lwephrojekthi: Ukugcinwa kwamanzi okuphuza. Imboni: Ukuhlinzekwa kwamanzi kamasipala. Indawo: Malaysia. Uhlelo lokusebenza: Ukugcinwa / ukwelashwa kwamanzi okuphuza. Inhloso: ukuhlinzeka ngendawo yokugcina engaphezulu komhlaba ethembekile, ebhekiswe emazingeni, enekhwalithi elawulwayo kanye nohlelo lokwakha olusebenzayo.
Izidingo Zephrojekthi
- Umthamo wokugcina: 20380m³
- Inani: 4
- Usayizi wethangi: φ17.58×21 m(H) iyunithi engu-4
- Indawo yokugcina: Amanzi okuphuza
- Amazinga asebenzayo: NSF/ANSI 61, ISO 28765, AWWA D103-09
- Umkhawulo wendawo: ikhwalithi elawulwayo, uhlelo olusebenzayo
Izinselelo Zobuchwepheshe
Umsebenzi wawudinga umthamo omkhulu, ohambisana nemithetho, onekhwalithi enganciki ekushiseleni kwensimu okuguquguqukayo. Uhlelo oluboshiwe olulawulwa yifekthri lunciphisa izinguquko zasendaweni ekhwalithini yokumboza nokuhlanganisa.
Isixazululo Sobunjiniyela / Somkhiqizo
- Uhlobo lwethangi: Ithangi eliboshiwe le-Glass-Fused-to-Steel (GFS)
- Impahla: amaphaneli ensimbi enekhabhoni ephansi anokumboza kwe-vitreous enamel okuhlanganiswe ku-820–930°C
- Uphahla: Uphahla lwedome ye-Aluminium
- Ukuhlelwa kwesakhiwo: igobolondo lephaneli eliboshiwe phezu kwesikhumbi somgogodla kakhonkolo elinamajoyinti ane-gasket
- Isisekelo: umgogodla kakhonkolo owenziwe ngobuchwepheshe onamabhawudi okubopha
- Izindinganiso ezisetshenzisiwe: NSF/ANSI 61, ISO 28765, AWWA D103-09
Ukuqaliswa Komsebenzi
Amapaneli enziwa futhi (kuma-GFS) afakwa i-enamel yasesitolo ngaphansi kokulawulwa kwekhwalithi yasefekthri, abese ethunyelwa ukuze amiswe ngokuboshwa endaweni. Amajoyinti ane-gasket nezinto zokubopha zesakhiwo zafakwa ngokulandela inqubo futhi zahlolwa ngokohlelo lwekhwalithi lomsebenzi. (Izinyathelo eziqondile zokuqalisa umsebenzi ezingaphezu kwerekhodi elinikeziwe azishiwo.)
Umphumela Wephrojekthi
- Isimo: Kuqediwe (2025-10)
- Umthamo ozuziwe: 20380m³ kuma-4
- Umphumela: ukugcinwa kwamanzi ngaphezulu komhlaba okunikezwa njengohlelo oluboshiwe, olubhekisela emazingeni
Ulwazi Lwephrojekthi | Imininingwane |
Uhlobo Lwephrojekthi | Ukugcinwa kwamanzi aphuzwayo |
Indawo | Malaysia |
Imboni | Ukunikezwa kwamanzi kamasipala |
Ukusetshenziswa | Ukugcinwa / ukwelashwa kwamanzi okuphuza |
Umkhiqizo | Ithangi eliboshiwe le-Glass-Fused-to-Steel (GFS) |
Umthamo | 20380m³ |
Inani | 4 |
Impahla | Glass-Fused-to-Steel (GFS) |
Amazinga | NSF/ANSI 61, ISO 28765, AWWA D103-09 |
Isimo Sephrojekthi | Kuqediwe (2025-10) |
Isithenjwa Esengeziwe — Costa Rica — Amanzi okuphuza (12650m³, 1, kuqediwe 2025-06)
Isendlalelo Sephrojekthi
Uhlobo lwephrojekthi: Ukugcinwa kwamanzi okuphuza. Imboni: Ukuhlinzekwa kwamanzi kamasipala. Indawo: Costa Rica. Ukusetshenziswa: Ukugcinwa / ukwelashwa kwamanzi okuphuza. Inhloso: ukuhlinzeka ngesiqukathi esingaphezulu komhlaba esithembekile, esibhekiselwe emazingeni, esilawulwa izinga futhi esinesimiso sokwakha esisebenzayo.
Izidingo Zephrojekthi
- Umthamo wokugcina: 12650m³
- Inani: 1
- Usayizi wethangi: φ40.49×9.6 m(H) iyunithi elilodwa
- Into yokugcina: Amanzi okuphuza
- Izindinganiso ezisetshenziswayo: NSF/ANSI 61, ISO 28765, AWWA D103-09
- Umkhawulo wendawo: ikhwalithi elawulwayo, uhlelo olusebenzayo
Izinselele Zobuchwepheshe
Umsebenzi wawudinga ivolumu enkulu, ehambisana nekhodi enekhwalithi eyayinganciki ekushiseleni kwensimu okuguquguqukayo. Uhlelo oluboshiwe olulawulwa efektri lunciphisa izinto eziguquguqukayo endaweni ekufakweni nasekhwalithini yamajoyinti.
Isixazululo Sobunjiniyela / Somkhiqizo
- Uhlobo lwethangi: Ithangi eliboshiwe le-Glass-Fused-to-Steel (GFS)
- Impahla: amaphaneli ensimbi enekhabhoni ephansi ane-vitreous enamel coating ehlanganiswe ku-820–930°C
- Uphahla: Uphahla lwedome le-Aluminium
- Ukuhlelwa kwesakhiwo: igobolondo lamaphaneli aboshiwe ku-concrete ring beam enamajoyinti ane-gasket
- Isisekelo: i-concrete ring beam eyakhiwe ngobunjiniyela enamabhawudi okubopha
- Amazinga asetshenzisiwe: NSF/ANSI 61, ISO 28765, AWWA D103-09
Ukuqaliswa Komsebenzi
Amaphaneli enziwa futhi (kwa-GFS) afakwa i-enamel yasefekthri ngaphansi kokulawulwa kwekhwalithi yasefekthri, abese ethunyelwa ukuze amiswe ngokubophelela endaweni. Amalunga ane-gasket nezinto zokubophelela zesakhiwo zafakwa ngokwenqubo futhi zahlolwa ngokohlelo lwekhwalithi lomsebenzi. (Izinyathelo eziqondile zokuqalisa umsebenzi ezingaphezu kwerekhodi elinikeziwe azishiwo.)
Umphumela Womsebenzi
- Isimo: Kuqediwe (2025-06)
- Umthamo ofinyelelwe: 12650m³ kulo 1
- Umphumela: ukugcinwa kwamanzi ngaphezulu komhlaba kunikezwe njengohlelo oluboshiwe, olubhekisela kumazinga
Ulwazi Lwephrojekthi | Imininingwane |
Uhlobo Lwephrojekthi | Ukugcinwa kwamanzi aphuzwayo |
Indawo | Costa Rica |
Imboni | Ukunikezwa kwamanzi kamasipala |
Ukusetshenziswa | Ukugcinwa / ukwelashwa kwamanzi okuphuza |
Umkhiqizo | Ithangi eliboshiwe le-Glass-Fused-to-Steel (GFS) |
Umthamo | 12650m³ |
Inani | 1 |
Impahla | Glass-Fused-to-Steel (GFS) |
Izindinganiso | NSF/ANSI 61, ISO 28765, AWWA D103-09 |
Isimo Sephrojekthi | Kuqediwe (2025-06) |
Izinzuzo Nemikhawulo
Izinzuzo
· - Ingaphakathi elingenasici — libushelelezi, alinazimbobo - Limelana nokugqwala — koqweqwe olufanayo - Ukulawulwa kwasekhaya — ukushiswa okungaguquguquki - Okusheshayo, kuyasuswa — amaphaneli aboshiwe
Imikhawulo
· - Ukuqhekeka — amaphaneli aphathwa ngokucophelela - Ukulungisa — inqubo koqweqwe ehambisanayo - Izinga lokushisa — ngaphansi kwezinga lokushisa eliphezulu lensimbi - Akukona konke — amanye amakhemikhali adinga i-FRP
Ukuqhathaniswa Kwezinhlobo Zamathangi Afanele
Umbandela | Ingilazi Ehlanganiswe Nensimbi | I-Epoxy Eboshiwe | Ithangi lengilazi elihlanganiswe nensimbi lihlanganisa amandla esakhiwo ensimbi ne-vitreous enamel yangaphakathi ehlanganiswe ku-820–930°C, okukhiqiza inhlanganisela engasebenzi, engagqwali. Kubathengi, okubalulekile ukuqinisekisa ukulawulwa kwe-enameling yomhlinzeki, ukuhambisana nezindinganiso, nezinkomba zamaphrojekthi eziqinisekisiwe ngaphambi kokuthenga. | Insimbi Eshiselwe |
I-Inert | Yebo (i-enamel) | Cha (ifilimu) | Yebo | Kufakwe i-coating |
Umthamo | 20–60,000 m³ | Okufanayo | Okuncane–okulingene | Okukhulu kakhulu |
Okuphuzwayo | NSF/ANSI 61 | Kuncike esitifiketini | Yebo | Kufakwe ngaphakathi |
Kulungele | Amanzi, i-WW, i-biogas | Amakhemikhali amnene | Ezenhlanzeko/ezinolaka | Amandla okusebenza/inqubo |
Indlela Yokukhetha Isixazululo Esifanele
· - Ukulawulwa komphakeli — umugqa wokufaka i-enamel kanye nesithando sakhe- Ubufakazi — ukuhlolwa kweholide (900–1500 V), idatha yokunamathela- Amazinga — ISO 28765 / AWWA D103-09 / NSF 61- Izinkomba — amaphrojekthi aqediwe afanayo- Okukhishwayo — ukubala, okokufaka kwesisekelo, i-BOM- Umjikelezo wempilo — izingxenye zokushintsha, isikhathi sokuhlola
Ukukhethwa kwe-Glass Fused To Steel Tank kufanele kulandele indlela yokugcina, umthamo, amazinga, kanye nemikhawulo yesiza. Isipiliyoni samaphrojekthi esiqinisekisiwe kanye nekhwalithi ebhaliwe (i-coating, i-holiday-test, kanye namarekhodi okunamathela) kubaluleke kakhulu kunezimangalo zokumaketha lapho kucaciswa ukufakwa okuhlala isikhathi eside, okuhambisana nemithetho.
Ukuze uthole ukusekelwa kwencazelo, i-Center Enamel ihlinzeka ngokufakwa kwe-Glass Fused to Steel Tank okubhekiselwe kukho, ubufakazi be-holiday-test nokunamathela, kanye nezilinganiso zesabelomali.
Imibuzo Evame Ukubuzwa (FAQ)
Iyini ithangi le-glass fused to steel?
Ithangi elakhiwe ngamaphaneli ensimbi anengaphakathi le-vitreous enamel elihlanganiswe ku-820–930°C laba yinhlanganisela engasebenzi, engagqwali futhi emelana nokugqwala, liboshwe ndawonye ngamajoyinti anama-gasket — livame ukubizwa ngethangi le-GFS.
I-Center Enamel ingaqinisekisa izimvume ezisebenzayo futhi yabelane ngezinkomba zezindawo ezifanayo zokufakwa kwe-Glass Fused to Steel Tank.
Yini okufanele ngiyihlole lapho ngithenga ithangi le-GFS?
Qinisekisa ukulawulwa kwe-enameling komhlinzeki kanye nesithando somlilo, ubufakazi bokuhlolwa kwe-holiday-test (900–1500 V) nokunamathela kwephaneli ngalinye, ukuhambisana namazinga (ISO 28765, AWWA D103-09, NSF/ANSI 61 yamanzi aphuzwayo), kanye nezinkomba eziqediwe ezifanayo.
I-Center Enamel isekela i-Glass Fused to Steel Tank nge-enameling yasefektri, ukuhlolwa kwabantu bangaphandle, kanye nokulethwa kwephrojekthi emhlabeni wonke.
Iqhathanisa kanjani i-GFS nensimbi enamafutha e-epoxy?
I-GFS inikeza umgoqo we-fired-enamel ongenzi lutho ohlala isikhathi eside futhi ogunyaziwe wokuphuza emanzini anamandla; i-epoxy iyifilimu eguquguqukayo eshibhile enomkhawulo wokungenzi lutho omncane.
Yimiphi imigomo esebenza kumathangi e-GFS?
I-ISO 28765 (ukuklama), i-AWWA D103-09 (eboshiwe), kanye ne-NSF/ANSI 61 / WRAS / ACS yokuxhumana namanzi okuphuza, kanye ne-ISO 9001 / 45001 kanye ne-EN 1090 yokukhiqiza.
Ihamba isikhathi esingakanani futhi ingakanani ithangi le-GFS?
Umthamo ngokuvamile 20–60,000 m³, uhlanganiswa ukuze uthwale umthwalo omkhulu; isikhathi sokusebenza esibhaliwe seminyaka engama-30+ ngamarekhodi ekhwalithi agcinwe kahle.
Thumela incazelo yakho; sizohlinzeka ngesiphakamiso sethangi le-GFS elinobufakazi be-enameling, ukuhambisana namazinga, kanye nezinkomba eziqinisekisiwe.
Xhumana ne-Center Enamel ukuze kwenziwe ukubuyekezwa kwencazelo kanye nesilinganiso sesabelomali kuphrojekthi yakho ye-Glass Fused to Steel Tank.
WhatsApp